Worth Data RF Terminal 7000 Specifikace stáhnout pdf (Strana 79)

Channel Changes

To determine the current channel of a Base Station , power up the Base and watch the LED light on the front

of the unit. On power UP, a Base LED will blink "channel +3" times. For example, a unit that blinks 5 times

on power up is operating on channel 2. Channel 0 blinks 3 times, channel 5 blinks 8 times.

Changing the Channel on a Base/Relay

The Base Station and its related Relays must have their channel set to the same channel as the RF Terminals

in their network. The channel is set on a Base or Relay by turning a rotary switch to the setting 0-5 (6

different channels to choose from). Use a very small flat head screwdriver to turn the switch to the desired

number. See the circuit board diagram on page A-1 for location of the rotary switch.

Setting the Relay ID

Each Relay must also have a unique ID, which is set by the RF Terminal Serial Configuration Utility.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 102 103

Žádné komentáře

Worth Data RF Terminal 7000 Specifikace Strana 79